How to Install New Vinyl Siding on Your Home

41
0
SHARE

Vinyl is not only the cheapest siding in cost, it is also has the most affordable labor costs. This is why Vinyl is so widely used in the housing market. The labor is so inexpensive because it is like installing a puzzle. You install vinyl by clicking pieces of siding into joints locking them in place.

Even though vinyl is a lot easier to install, it is still highly recommended that you have an experienced vinyl siding Chicago company install it for you. The reason for this is that there are still many carpentry principles that are used for installing this type of siding.

Installing siding on your home

Principles Of Vinyl Siding Installation

When installing this for the first time, make sure you do not jam it into the exterior corner of your house. The reason why is that expansion and contraction has a major effect on Vinyl. You may install your vinyl siding in the winter and forget to leave any play in-between the joints, then in the summer when expansion takes place, your vinyl siding will begin to buckle and come off of the side of the house. This creates a very unattractive look and is extremely hard to fix.

Make sure that all runs that are longer than 12 feet have a joint installed. You should utilize material in-between each joint flange in order to still accommodate any expansion in your vinyl. This again is due to the expansion and contraction coefficient in vinyl siding.

Summer vinyl siding expansion effectsThree Bullets For Siding Success

  • Make sure your siding runs are level. If your siding is not level you will have major issues with the appearance of the siding. There is nothing worse than waiting until you have installed your siding to find out that it is not level.

 

  • Wherever you have overlaps in your siding, make sure the overlap is in the same direction as the run. If the overlaps are not in the same direction as the run of siding, it will not be hidden and you will be able to visually see the joints in the siding when walking around the house. It is common practice to make the joints overlap in the least visible spots possible. You will be a lot happier with the appeal of your house if you follow this essential principle.

 

  • When placing nails in the sleuths at the top of your siding, make sure you leave about an eighth of an inch to keep some slack in the sleuth. The reason for this is that you don’t want to have your siding locked in. If your siding is completely locked in, you would have to damage the vinyl if you wanted to make any changes to the finished product. By leaving a gap in the nails, you will be able to make any adjustments necessary since the rest of the siding is pieced together by joints.

If you have never installed siding before, it is very important that you contact a licensed contractor. A lot of things do change and these are only basic principles for vinyl siding installation. If you are not a trained carpenter you can still install your own siding on your house, just make sure you at least consult with a local contractor.

NO COMMENTS